Draw-Tite I-Command Brake Controller - Bakers Dozen

Draw-Tite's I-Command electronic trailer brake control combines all the great features found on Activator I & II, III plus it features a Plug-N-Play port to accept Tow Ready custom fit wiring harnesses, making installation on most full-size pickups, vans and SUV's a snap.

I-Command is compact and contains no moving parts or pendulums so it can be mounted virtually anywhere and in any position. Also equipped with on-board diagnostics for overload, open ground. Bakers dozen - buy 12 and get 1 free.

Not recommended for use with BMW X5 Sport Utility Vehicles.

Fits: 2, 4, 6, and 8 Brake Trailers

• Output - For ease of adjustment, the output control is located on the front of I-Command. It has a up-front push button adjustment and its output indicator is a digital display that shows the output when the brakes are applied.
• Sync - The sync control has push button adjustment located on the front of the controller to syncronize the braking between the tow vehicle and trailer. The sync setting is shown on the I-Command's digital display.
• Manual - The manual control is activated by squeezing the trigger located on the front of I-Command. When applied, it will illuminate both the tow vehicle and trailer's stop lights as required by National Highway Traffic Safety Administration regulations.
• Installation - I-Command has no moving parts or pendulums to adjust, so it can be mounted in virtually any position. I-Command also includes a Plug-N-Play port to accept Tow Ready brake control harnesses.