2003-2022 Ram 2500 & 3500 Models Draw-Tite Class V 2-1/2 inch Trailer Hitch Receiver

Class V hitches are very similar to Class III & IV hitches except for the weight ratings. Class V hitches are Weight Carrying (WC) and Weight Distributing (WD) hitches. Class V hitches used as Weight Carrying are rated up to 20,000 lbs. Gross Trailer Weight (WCGTW) with a maximum trailer Tongue Weight (WCTW) of 2,700 lbs.

Hitches that are used for Weight Distributing are rated up to 20,000 lbs. Gross Trailer Weight (WDGTW) with a maximum trailer Tongue Weight (WDTW) of 2,700 lbs. Please see the Specification tab above for the weight ratings of this hitch.

This style of hitch uses a 2-1/2" square receiver opening. The use of a ball mount and hitch ball of the same rating or higher is required. To use the weight distribution side of the hitch a weight distribution system is required. Class V hitches attach to the vehicle frame only.

2011 - 2022 Models - Rear spring hanger brackets must be mounted above the frame or hitch cannot be installed.

Always consult your owner's manual for vehicle rating.

• Requires temporary removal of bumper during installation
• Includes 2 & 4 WD models with heavy duty suspension. 3/4 and 1 ton vehicles only.
• Will not fit models with 34 inch wide frames.
• Hitch crosstube is visible beneath bumper
• Requires removal of factory hitch if equipped
• With this hitch installed the step bumper is no longer able to be used as a towing point.
• 2011 Models - Rear spring hanger brackets must be mounted above the frame or hitch cannot be installed.

Optional Accessories

• ZCI Zero Contact Universal Modulite KIt Wiring Light Kit P/N 119251
• Hardwire ModuLite HD Protector Trailer Light Power Module With Wiring Kit Multi-fit Wiring Harness P/N 119148
• Hardwire Multi-Fit Tail Light Wiring Harness P/N 20252

Click Here for a link to our complete Ball Mount Selection